医院化验室的超纯水设备配置要求 hospital laboratory pure water equipment configuration requirements

GMP-compliant pure water system for hospitals: product specifications from Shanghai Binrun. Key features include:

Brand: Shanghai Binrun

Model: GMP Pure Water System for Hospitals

Industry application: Hospital cleaning and sterilization

Production capacity: 0.5 tons per hour (customizable to meet customer needs)

Operating mode: Continuous operation, 24 hours a day

Control method: Fully automated control system

Input water temperature range: 10°C to 35°C

8.Input water quality:

Tap water,

Underground water,

Surface water,

Wastewater

Output quality:

Superpure water with an electrical conductivity of ≤2 μS/cm (resistivity ≥0.5 MΩ *CM)

Efficiency rate of the purification process ≥75%

Rated voltage for the system components is 380V.

The power consumption of the raw-water pump is approximately 0.5 kW/hour, while that of the high-pressure pump is about 1.5 kW/hour.

Shanghai's GMP standards for hospital pure-water systems specify:

1.Electrical conductivity should be ≤2 μS/cm (resistance coefficient ≥0,50MΩ*cm).

2.The purified drinking-water must comply with the standards set by China's Pharmacopoeia in effect as of 2015.

3.Online monitoring systems are used to detect and record changes in purity levels based on resistance values measured at specific temperatures.

4.In pharmaceutical industries, purified drinking-water should have an electrical resistance coefficient ≥500kΩ/25℃; this level must be maintained even when using these waters for injection or eye-drop container rinsing.

Post-sales service provided by Shanghai Binrun includes:

1.Warranty commitment – one year after successful trial runs; free repairs during warranty period if caused by non-human factors.

2.Trial run commitment – installation complete, followed by pressure testing and adjustments until satisfactory results are achieved; agreement signed off on before departure from site.

3.Training commitment – technical personnel will assist with installation and troubleshooting upon request; training provided until normal operation ensured.

4.Repair commitment – response within12-24 hours following notification of any issues requiring onsite service support during warranty period or beyond it.

5.Lifetime support promise– providing parts replacement services beyond expiration date at a cost upon request after warranty ends; timely delivery guaranteed regardless.

For all spare parts needed during both warranty periods and those ending later on—prompt availability assured!